Mold Remediation Cost in Jacksonville, FL
Jacksonville mold pricing in one paragraph: small contained patches run a few hundred dollars, the typical whole-job range is $1,000–$3,875 (median $2,125), HVAC involvement multiplies everything, and whole-house contamination reaches five figures. Lower cost of doing business than South Florida; crawlspace and rental-property jobs are a larger share. The scenario table below puts numbers on each of those.
You pick who calls. We never sell your number.We never sell or blast your number — one call goes to one company you choose.
Mold remediation in Jacksonville costs $1,000–$3,875 for a typical job (median $2,125, 2026 data). Room, material, and HVAC involvement drive the spread — full breakdown below.
Build your itemized estimate for Jacksonville
Pick where the mold is and how large the area is for an instant market range tuned to Jacksonville — an estimate to set expectations, not a quote. No email, nothing to submit.
Many local jobs start near $1,000 — small bathroom patches run lower, and a spot under about 10 sq ft is often a safe DIY job. Attic, HVAC, and post-flood work run higher, up to $3,875. These are market estimates, not quotes — the figure that matters is what a licensed pro quotes after seeing the actual damage.
Jacksonville mold remediation costs by scenario (2026)
| Scenario | Low (25th) | Typical | High (75th) |
|---|---|---|---|
| Typical remediation job | $2,125 | $3,875 | |
| Bathroom | $1,000 | $2,025 | |
| Basement / crawlspace | $1,925 | $4,150 | |
| Attic | $2,575 | $5,525 | |
| HVAC / ductwork | $3,675 | $8,750 | |
| After a flood or major leak | $5,050 | $11,050 | |
| Independent inspection + testing | $425 | $650 |
Methodology: figures are 25th / median / 75th percentile of recent area remediation jobs, adjusted for the local market. Inspection & testing is priced separately because, by Florida law, an independent party should do it. Source: MoldVerified cost corpus — national datasets adjusted for the local market. Data refreshed 2026-06-03.
How a real remediation job runs
Five steps, in order — so you know what each line on the bill is for.
- 1
Independent inspection & testing
A licensed assessor maps how far the mold has spread and takes air or surface samples. In Florida this assessor legally can't be the company that does the removal, so the findings have no upsell behind them.
- 2
Containment
The work area is sealed off with plastic sheeting and put under negative air pressure, so spores disturbed during removal can't drift into the rest of the home.
- 3
Removal of contaminated porous material
Drywall, insulation, carpet, and other porous materials the mold has grown into are cut out and bagged. Hard, non-porous surfaces are cleaned in place; porous ones can't be reliably saved.
- 4
Drying & HEPA air scrubbing
HEPA-filtered scrubbers and dehumidifiers run until the area is dry and the air is clear. This step, plus fixing the original moisture source, is what keeps the mold from returning.
- 5
Independent clearance test
A party other than the remediator re-tests the air and surfaces to confirm the levels are back to normal. A passing clearance report is your proof the job actually worked — and the document a buyer or lender will ask for.
Compare bids on the same scope
A $1,500 quote and a $3,500 quote often aren't the same job — until you check what each one actually includes. Make sure every bid covers:
- Containment with negative air pressure. The work area is sealed off and kept under negative pressure so spores can't drift into clean rooms during removal.
- HEPA air scrubbing. HEPA-filtered scrubbers run during the work to capture airborne spores — not just a fan in the doorway.
- Removal of porous material — not just cleaning. Contaminated drywall, insulation, and carpet come out. Mold that has grown into porous material can't be reliably wiped clean.
- Fixing the moisture source. The leak, condensation, or humidity that fed the mold gets fixed. Skip this and it grows back, no matter how good the cleanup was.
- Independent clearance test. A party other than the remediator verifies the air and surfaces passed before you pay the final invoice and re-enter.
A quote far below market usually skips one of these — and that's usually the reason the mold comes back. Ask any company to confirm all five in writing before you compare prices.
Straight answers
How much does mold remediation run in Jacksonville?
Typically $1,000–$3,875 per job (median $2,125). Small contained patches run a few hundred dollars; HVAC-spread or whole-house contamination runs five figures. 252 verified companies compete for this work in the Jacksonville area, which keeps quotes honest — if you get two numbers far apart, get a third.
What makes the price go up?
The big four: how much area, what it's growing in (porous = removal, not cleaning), whether the AC system is involved, and how hard the space is to contain and work in. A still-active leak adds plumbing or roofing to the bill — but skipping it guarantees a repeat.
Is a cheap quote a red flag?
Treat it as a question: what's not included? The common omissions are containment (so spores spread during removal) and independent clearance testing (so nobody verifies the result). Both omissions cost you more later than they saved up front.
Get a real quote from a verified Jacksonville company
252 companies checked against the FL DBPR registry serve the Jacksonville area. One call, one company — never a lead blast.
You pick who calls. We never sell your number.We never sell or blast your number — one call goes to one company you choose.
How Jacksonville compares to the rest of the state
A typical Jacksonville remediation job runs about 8% below the state's typical market. That's local labor and demand at work, not a different kind of job.
Why: Lower cost of doing business than South Florida; crawlspace and rental-property jobs are a larger share.
See every metro side by side on the Florida cost pillar. Data refreshed 2026-06-03.
How to read a remediation quote
A legitimate quote breaks the job into these parts. Use it as a checklist: a number you can't map to a line below is a number worth questioning.
| Line item | What it is | Typical range |
|---|---|---|
| Independent assessment & testing | A party other than the remediator inspects, samples, and scopes the job. By Florida law the assessor can't also do the removal — keep them separate. | $250 – $700 |
| Containment setup | Plastic barriers and negative air pressure seal off the work area so spores can't drift into clean rooms. Usually bundled into the remediation labor line. | — |
| HEPA filtration & air scrubbing | HEPA-filtered scrubbers run throughout the work to capture airborne spores — equipment and runtime, not a fan in the doorway. Typically part of the remediation line. | — |
| Removal & disposal | The largest line on most quotes: contaminated drywall, insulation, and carpet are removed, bagged, and hauled — labor plus dump fees, scaling with square footage. | $1,100 – $4,200 |
| Clearance testing | After the work, an independent re-test confirms the air and surfaces passed before you pay the final invoice and re-enter. Your written proof the job worked. | $250 – $450 |
| Rebuild / repairs | Putting back what came out — drywall, paint, flooring — plus fixing the leak or humidity source. Priced per your finishes, so it's quoted job-by-job, not from a table. | — |
Ranges are 25th–75th percentile bands from the cost corpus; an em-dash means the line is priced job-by-job. A quote missing containment or clearance testing is a red flag — see mold scam red flags. Data refreshed 2026-06-03.
Estimate your own job
Pick where the mold is, how large the area is, and your part of Florida for an instant market range — an estimate to set expectations, not a quote. No email, nothing to submit.
Pick a scenario, size, and metro to build your itemized Florida estimate. No email, no phone number — it stays on this page.
Free · nothing to submitYou pick who calls — number never sold
Talk to a verified Jacksonville pro