Mold Remediation Cost in Florida (2026)
Treat any quote outside $1,100–$4,200 for a typical Florida job as a question to ask, not an order to sign — the local median is $2,300. This page shows the full scenario breakdown, what legitimately moves a price up, and where to find verified companies to quote against each other.
You pick who calls. We never sell your number.We never sell or blast your number — one call goes to one company you choose.
Mold remediation in Florida costs $1,100–$4,200 for a typical job (median $2,300, 2026 data). Room, material, and HVAC involvement drive the spread — full breakdown below.
Build your itemized estimate for your part of Florida
Pick where the mold is and how large the area is for an instant market range tuned to your metro — an estimate to set expectations, not a quote. No email, nothing to submit.
Many local jobs start near $1,075 — small bathroom patches run lower, and a spot under about 10 sq ft is often a safe DIY job. Attic, HVAC, and post-flood work run higher, up to $4,075. These are market estimates, not quotes — the figure that matters is what a licensed pro quotes after seeing the actual damage.
Florida mold remediation costs by scenario (2026)
| Scenario | Low (25th) | Typical | High (75th) |
|---|---|---|---|
| Typical remediation job | $2,225 | $4,075 | |
| Bathroom | $1,075 | $2,125 | |
| Basement / crawlspace | $2,025 | $4,375 | |
| Attic | $2,725 | $5,825 | |
| HVAC / ductwork | $3,875 | $9,225 | |
| After a flood or major leak | $5,325 | $11,650 | |
| Independent inspection + testing | $425 | $675 |
Methodology: figures are 25th / median / 75th percentile of recent area remediation jobs, adjusted for the local market. Inspection & testing is priced separately because, by Florida law, an independent party should do it. Source: MoldVerified cost corpus — national datasets adjusted for the local market. Data refreshed 2026-06-03.
How a real remediation job runs
Five steps, in order — so you know what each line on the bill is for.
- 1
Independent inspection & testing
A licensed assessor maps how far the mold has spread and takes air or surface samples. In Florida this assessor legally can't be the company that does the removal, so the findings have no upsell behind them.
- 2
Containment
The work area is sealed off with plastic sheeting and put under negative air pressure, so spores disturbed during removal can't drift into the rest of the home.
- 3
Removal of contaminated porous material
Drywall, insulation, carpet, and other porous materials the mold has grown into are cut out and bagged. Hard, non-porous surfaces are cleaned in place; porous ones can't be reliably saved.
- 4
Drying & HEPA air scrubbing
HEPA-filtered scrubbers and dehumidifiers run until the area is dry and the air is clear. This step, plus fixing the original moisture source, is what keeps the mold from returning.
- 5
Independent clearance test
A party other than the remediator re-tests the air and surfaces to confirm the levels are back to normal. A passing clearance report is your proof the job actually worked — and the document a buyer or lender will ask for.
Compare bids on the same scope
A $1,500 quote and a $3,500 quote often aren't the same job — until you check what each one actually includes. Make sure every bid covers:
- Containment with negative air pressure. The work area is sealed off and kept under negative pressure so spores can't drift into clean rooms during removal.
- HEPA air scrubbing. HEPA-filtered scrubbers run during the work to capture airborne spores — not just a fan in the doorway.
- Removal of porous material — not just cleaning. Contaminated drywall, insulation, and carpet come out. Mold that has grown into porous material can't be reliably wiped clean.
- Fixing the moisture source. The leak, condensation, or humidity that fed the mold gets fixed. Skip this and it grows back, no matter how good the cleanup was.
- Independent clearance test. A party other than the remediator verifies the air and surfaces passed before you pay the final invoice and re-enter.
A quote far below market usually skips one of these — and that's usually the reason the mold comes back. Ask any company to confirm all five in writing before you compare prices.
Straight answers
What do Florida companies charge for mold remediation?
Typically $1,100–$4,200 per job (median $2,300). Small contained patches run a few hundred dollars; HVAC-spread or whole-house contamination runs five figures.
What makes the price go up?
Contaminated area and material drive most of it — a 6-sq-ft tile patch and a flooded drywall room are different jobs entirely. HVAC involvement is the big multiplier. Containment difficulty and moisture-source repair fill out the quote.
Is a cheap quote a red flag?
Frequently. The corners that get cut on cheap mold jobs are invisible at quote time: no negative-pressure containment, no HEPA scrubbing, no post-job clearance test. You find out when it comes back. Compare quotes on scope, not just total.
Jump straight to the verified company lists by metro.
How to read a remediation quote
A legitimate quote breaks the job into these parts. Use it as a checklist: a number you can't map to a line below is a number worth questioning.
| Line item | What it is | Typical range |
|---|---|---|
| Independent assessment & testing | A party other than the remediator inspects, samples, and scopes the job. By Florida law the assessor can't also do the removal — keep them separate. | $250 – $700 |
| Containment setup | Plastic barriers and negative air pressure seal off the work area so spores can't drift into clean rooms. Usually bundled into the remediation labor line. | — |
| HEPA filtration & air scrubbing | HEPA-filtered scrubbers run throughout the work to capture airborne spores — equipment and runtime, not a fan in the doorway. Typically part of the remediation line. | — |
| Removal & disposal | The largest line on most quotes: contaminated drywall, insulation, and carpet are removed, bagged, and hauled — labor plus dump fees, scaling with square footage. | $1,100 – $4,200 |
| Clearance testing | After the work, an independent re-test confirms the air and surfaces passed before you pay the final invoice and re-enter. Your written proof the job worked. | $250 – $450 |
| Rebuild / repairs | Putting back what came out — drywall, paint, flooring — plus fixing the leak or humidity source. Priced per your finishes, so it's quoted job-by-job, not from a table. | — |
Ranges are 25th–75th percentile bands from the cost corpus; an em-dash means the line is priced job-by-job. A quote missing containment or clearance testing is a red flag — see mold scam red flags. Data refreshed 2026-06-03.
What remediation costs across Florida
Same typical job, ten metros. The spread is local labor and demand — coastal South Florida runs highest, the Panhandle and North Florida run lower. These are market estimates, not quotes.
| Metro | Typical | Range (25th–75th) | Market note |
|---|---|---|---|
| Miami | $2,575 | Highest labor + coastal flood exposure in the state pushes prices above national; insurance-related work is common. | |
| Fort Lauderdale | $2,525 | Broward's coastal humidity and dense waterfront housing push prices near South Florida's top; deep contractor supply keeps competition honest. | |
| West Palm Beach | $2,475 | Palm Beach County labor runs slightly below Miami; older condo stock makes building-wide and AC-handler jobs common. | |
| Sarasota | $2,300 | Gulf-coast humidity with a mix of barrier-island waterfront and inland retirement housing keeps demand steady at mid-market rates. | |
| Fort Myers | $2,250 | Southwest Florida pricing sits near the national line, but lingering post-Ian surge mold can enlarge a job's scope. | |
| Tampa | $2,225 | High year-round humidity plus Gulf storm exposure keeps demand steady; competitive market keeps mid-range pricing near national. | |
| Orlando | $2,175 | Inland humidity and AC-condensation problems dominate; slightly below-national labor rates. | |
| Jacksonville | $2,125 | Lower cost of doing business than South Florida; crawlspace and rental-property jobs are a larger share. | |
| Tallahassee | $2,075 | North Florida's lower cost of doing business shows up in pricing; crawlspace and student-rental jobs are a larger share. | |
| Pensacola | $2,075 | Panhandle labor rates run below the peninsula, but heavy rainfall and repeat hurricane exposure keep demand high. |
Methodology: typical is the median (50th percentile) of recent area remediation jobs, scaled by each metro's local labor and demand; the range spans the 25th to 75th percentile. See the full methodology. Data refreshed 2026-06-03.
Those figures price the work; they do not say who may legally perform it. Broward sits second only to Miami-Dade on a typical job in the table above, and at that end of the range the gap between two quotes is usually scope rather than skill — so before you weigh Fort Lauderdale totals against each other, check which Broward mold remediators hold a current MRSR license. Miami-Dade sets the top of that same range, and a high South Florida total says nothing about the credential behind it, so see what each Miami company is verified to hold before you compare quotes: every listing there shows a state license or an industry certification, with the date it was last checked.
The bottom of the table asks a different question. Pensacola and Tallahassee tie for the lowest typical job in Florida, and that is a labor-rate spread rather than a lighter job — the 10-square-foot licensing line is the same in the Panhandle as it is in Miami. The Escambia-area pool also mixes licensed remediators with independent assessors, and §468.8419, F.S. bars one licensee from both assessing and remediating the same project — so read a low Panhandle quote against the credential first: see how the Pensacola pool splits between licensed remediators and assessors. Tallahassee ties it at that same figure, and §468.8419 does not loosen because the total is lower — so before a low North Florida number settles the decision, see which Tallahassee firms are registered to remediate rather than assess.
Which Florida benchmark applies to your area
We publish a figure for the twelve metros where we have an evidenced local multiplier, so we won’t put a price on a town we have no data for. Instead, find your county below and use the nearest market we do price — that metro’s typical job is the closest honest yardstick for a quote in your area.
| Your area | Towns it covers | Nearest market we price | Typical | Range (25th–75th) |
|---|---|---|---|---|
| Alachua County | Gainesville, Alachua, Newberry, High Springs | Jacksonville | $2,125 | $1,000–$3,875 |
| Nassau County | Amelia Island, Fernandina Beach, Yulee | Jacksonville | $2,125 | $1,000–$3,875 |
| Polk County | Lakeland, Winter Haven, Lake Wales, Haines City, Davenport | Orlando | $2,175 | $1,050–$4,000 |
| Marion County | Ocala, Belleview, Dunnellon | Orlando | $2,175 | $1,050–$4,000 |
| Nature Coast | Spring Hill, Brooksville, New Port Richey, Crystal River, Inverness | Tampa | $2,225 | $1,075–$4,075 |
| Space Coast | Melbourne, Palm Bay, Titusville, Cocoa | Orlando | $2,175 | $1,050–$4,000 |
| Manatee County | Bradenton, Palmetto, Anna Maria Island | Sarasota | $2,300 | $1,100–$4,200 |
| Treasure Coast | Vero Beach, Stuart, Jensen Beach | Port St Lucie | $2,350 | $1,125–$4,275 |
| Charlotte County | Punta Gorda, Port Charlotte, Rotonda West | Cape Coral | $2,275 | $1,100–$4,150 |
| Collier County | Naples, Marco Island, Immokalee | Fort Myers | $2,250 | $1,075–$4,125 |
| Palm Beach County | Wellington, Royal Palm Beach, Jupiter, Boca Raton | West Palm Beach | $2,475 | $1,200–$4,525 |
| The Florida Keys | Key West, Islamorada, Key Largo | Miami | $2,575 | $1,225–$4,700 |
| Big Bend | Quincy, Crawfordville, Monticello, Perry, Apalachicola | Tallahassee | $2,075 | $1,000–$3,775 |
| Northwest Panhandle | Panama City, Destin, Fort Walton Beach | Pensacola | $2,075 | $1,000–$3,775 |
Market estimates, not quotes — scope moves your bill far more than geography does. Every multiplier on record sits between 0.90 and 1.12 of the statewide baseline, so a smaller town almost always lands inside the same band as its nearest metro. Cost ranges refreshed 2026-06-03.
The table above prices the work; it does not say who is licensed to do it. Bradenton, Palmetto and Anna Maria Island read against Sarasota, and the directory draws that same boundary, listing Sarasota and Manatee as one market rather than two, so the benchmark and the shortlist come from the same pool. Which part of that pool you call still matters: §468.8419, F.S. bars the licensee who assesses a project from remediating it, and mold that returns on this coast usually traces to a moisture source nobody found rather than a cleaning done badly. Price a Manatee County quote off the Sarasota row, then see which Sarasota–Manatee companies are licensed to remediate rather than assess.
- How much does mold remediation cost in a Florida town you don’t price?
- Use the statewide range as your yardstick: about $1,100 to $4,200, with a typical job near $2,300. We publish a local figure only for the twelve metros where we have an evidenced multiplier, and those sit between roughly 10% below and 12% above that baseline — so a smaller town almost always falls inside the same band. Find your county in the table above and price off the nearest market we do cover: Alachua and Newberry track Jacksonville, Wellington and Jupiter track West Palm Beach, Lake Wales and Haines City track Orlando.
Estimate your own job
Pick where the mold is, how large the area is, and your part of Florida for an instant market range — an estimate to set expectations, not a quote. No email, nothing to submit.
Pick a scenario, size, and metro to build your itemized Florida estimate. No email, no phone number — it stays on this page.
Free · nothing to submitYou pick who calls — number never sold
Talk to a verified pro